| Service Note: C7048A-05 | |
General Information
| Service note number: | C7048A-05 |
| SN description: | Spring and Lever Removed from Product |
| Supersedes: | |
| Product number: | C7048A |
| Product description: | Steelhead network bundle |
| Model name: |
Administrative Information
| Service note objective: | Information Only |
| Recommended action: | [none] |
| Originating entity: | 4600/ckyle |
| Expiration date: | |
| Service type: | Not Applicable |
| No of labor hours paid by div: | 0 |
| Cost of parts: | Not applicable |
| Cost of travel: | Not applicable |
| Service inventory: | Not applicable |
| Used Parts: | Not applicable |
Affected serial numbers:
| Product number | Starting serial number | Ending serial number |
| C7048A |
Detailed Service Note
Content
Situation
The Lever (RA0-1174) and Tension Spring (RA0-1175) will be eliminated. The spring and tension lever were initially put in to help “pick” paper, but they were not required for this action and were removed. Any unit without these two items will work just fine.
With Spring and Lever
Without Spring and Lever
No action/solution required if the spring and lever are not in the product. There is also no need to remove these from the product (unless defective). If either part is defective then remove both parts. They do not need to be replaced.
Action
To Be Performed By: N/A
Additional Information
N/A
Related Service Notes
| C7044A-04 | C7045A-04 | C7047A-04 | C7048A-05 | C7049A-04 | Q1342A-01 |